Product General Information
Place of Origin:
|Brand Name:||HE CAN|
|Model Number:||Middle printer|
|Applicable PCB Size:||320*400MM|
|Adjust method:||Manual adjust|
|Adjust direction:||X Y Z axial direction|
|Positioning method:||Three-Sides Positioning|
Simple manual stencil printer machine is small and convenient, especially for new product trial
Installation of the steel stencil and printing
1. Put steel stencil in the wire clip, and tighten the steel stencil by its hand wheel.
2. Put the simple DIY position-er on the printing table and also put the PCB accordingly. Adjust the five-star handle on the operation platform to make the holes on PCB match the holes on the steel stencil.